Non-food Processing Aeration System

Non-food Processing Aeration System3.jpg

Non-food Processing Aeration System4.jpg

Non-food Processing Aeration System (Textile industry/Latex industry/Non-woven fabric industry)

This system could apply to all non-food foaming product, such as textile industry, latex industry and non-woven fabric industry etc.

Capacity will be designed according customer needs; Also depending on the procedure & specific gravity provided.

We have specially designed aeration system continuously supply foaming product for production. The machine can be installed independently for easy relocating working place. Machine guarantees special economy, durability, high performance, high quality, easy clean, save labour & place at reasonable prices.

Foam Process

The process begins with, all ingredients will be pre-weighed and set ready for handling at the pre-mixer. After starting the pre-mixer the ingredients will be manually fed into the pre-mixer at a rate and sequence as required for the specific recipe. Once the batch is pre-mixed then feed the whole batch into the buffer tank which is ready for production.

The air,synchronises with the main pump, is injected into the mixing head at a rate as set from the touch screen panel. In the mixing head the pins of both the rotor and stator see to it that the air is homogeneously mixed with the ingredient down to the required density and structure.

If necessary, we inject the gel or other chemicals through the front, middle, rear or cover entrance of the mixing head into the foam. It can be set automatically dosing the required amount from the touch screen panel.

From the mixing head the aerated foam is discharged towards the manifold depositing system, mould, trays or steel band oven or discharge to hopper type depositor for further processing.

Consulting Products

Key words:

Non-food Processing Aeration System

Classification:

Equipment

Production Line

undefined

Product Description

Aeros to pass the machine
“Continuous aeration is a wellknown technology,mostly used in confectionery, pastries and milk products. In addition, the continuous amouth fel), homogenization and/or power mixing.The mixing head manufactured by Aeros has reached the world standard.The mixingautomation of the production process, saves more human resources, and reduces energy consumption and material waste. It is very imp
In the past, the production technology of mixing heads was very complex and expensive, but now Aeros can provide relatively cheap priture the mixing head, avoiding the complexity of the welding mixing needle process.
The rotor and stator of the mixing head are manufactured using a precision cutting process, with the following benefts:-The needles of the rotor and stator of the Aeros mixing head are not welded.
·The mixing head is made of a complete piece of material and is designed to be hard, so it is suitable for viscous products.·The smooth surface of the mixing head and the characteristics of no welding make it easier to clean after production.lmproved the design of the mixing head to make the size distribution of the foam more even.