Whole Egg Cake Continuous Inflation System

Whole Egg Cake Continuous Inflation System

The system output is designed according to customer requirements and depends on the product formula and specific gravity. It can be used in all cake products, such as layer cakes, mini rolls, cupcakes, muffins, cookies, egg cakes, mousse, cream, etc.

Specially designed for the food factory to design a set of continuous cake automatic aeration system, including pre-mixing cylinder, storage cylinder, automatic inflator and pouring machine equipment, etc.; the system can reduce manpower costs, reduce material waste, improve production efficiency and stable product quality.

Aeros System Production Process Overview

Weigh all raw materials in advance and put them in the pre-mixing tank (before starting the pre-mixing tank), and pour them into the mixing tank manually according to the sequence and weight required by the formula. When the mixing procedure is completed, turn on the conveying pump to pump the whole cylinder of cake slurry to the storage cylinder for production; at the same time, the mixer is ready to produce the next cylinder after the conveying is completed. The cake slurry in the storage cylinder will be pumped from the main pump at the bottom of the cylinder to the inflator according to the set output, and then enter the inflator mixing head for inflation.

The air and the main pump of synchronous control are fed into the mixing head according to the flow rate set by the main control version. The rotor in the mixing head and the needle bar of the stator mix the air and the cake slurry evenly to the required density and structure. The aerated cake slurry is conveyed from the mixing head to the pressure pouring machine and poured on the conveyor belt in portions.

Consulting Products

Key words:

Whole Egg Cake Continuous Inflation System

Classification:

Equipment Center

Production Line

Cake production line

相关下载

Product Description

Aeros to pass the machine
“Continuous aeration is a wellknown technology,mostly used in confectionery, pastries and milk products. In addition, the continuous amouth fel), homogenization and/or power mixing.The mixing head manufactured by Aeros has reached the world standard.The mixingautomation of the production process, saves more human resources, and reduces energy consumption and material waste. It is very imp
In the past, the production technology of mixing heads was very complex and expensive, but now Aeros can provide relatively cheap priture the mixing head, avoiding the complexity of the welding mixing needle process.
The rotor and stator of the mixing head are manufactured using a precision cutting process, with the following benefts:-The needles of the rotor and stator of the Aeros mixing head are not welded.
·The mixing head is made of a complete piece of material and is designed to be hard, so it is suitable for viscous products.·The smooth surface of the mixing head and the characteristics of no welding make it easier to clean after production.lmproved the design of the mixing head to make the size distribution of the foam more even.