tel
Wechat:
Aerososcar
tel
Tel:
+86-18123521651
中文版

MENU

/
/
/
Muffin Production line Wholesale Price introduces knowledge of one-shot cutting units for muffin processing

Muffin Production line Wholesale Price introduces knowledge of one-shot cutting units for muffin processing

  • Sort:Industry news
  • Auth:
  • Source:
  • Release time:2022-02-17 14:47
  • Pvs:

【概要描述】It includes a bevel gear, a transmission gear, a servo motor, an auxiliary gear, a connecting shaft, a scrap cutter, a rotating shaft and a transverse cutter. The upper end of the servo motor is provided with a transmission gear, and the rear end of the transmission gear is provided with a bevel gear. The front end of the bevel gear is provided with an auxiliary gear.

Muffin Production line Wholesale Price introduces knowledge of one-shot cutting units for muffin processing

【概要描述】It includes a bevel gear, a transmission gear, a servo motor, an auxiliary gear, a connecting shaft, a scrap cutter, a rotating shaft and a transverse cutter. The upper end of the servo motor is provided with a transmission gear, and the rear end of the transmission gear is provided with a bevel gear. The front end of the bevel gear is provided with an auxiliary gear.

  • Sort:Industry news
  • Auth:
  • Source:
  • Release time:2022-02-17 14:47
  • Pvs:
Detail

How much do you know about the one-shot cutting device for muffin processing? The editor of Muffin Production line Wholesale Price will take you to a brief look at it.


It includes a bevel gear, a transmission gear, a servo motor, an auxiliary gear, a connecting shaft, a scrap cutter, a rotating shaft and a transverse cutter. The upper end of the servo motor is provided with a transmission gear, and the rear end of the transmission gear is provided with a bevel gear. The front end of the bevel gear is provided with an auxiliary gear, and the upper end of the auxiliary gear is provided with a connecting shaft. This design can be used for electric transmission or manual transmission. A scrap cutting knife is installed on the rotating shaft. The inner end of the cutting knife is provided with a transverse cutting knife, and the transverse cutting knife is installed on the rotating shaft. The design can integrate the scrap cutting of the muffin with the authentic cutting, realize the synchronization of the above processes, and reduce the equipment cost. The utility model Easy to use, increase functionality, improve processing efficiency, and high reliability.
The above is the introduction of Muffin Production line Wholesale Price: the knowledge about the one-shot cutting device for muffin processing.

关键词:

More News

Daily cleaning of Wholesale Aerating machine
Daily cleaning of Wholesale Aerating machine
Time of issue : 2022-09-16 10:51:31
After long-term operation of Wholesale Aerating machine, it is easy to deposit calcium and iron scale in the water on the aeration membrane, block the holes of the aeration plate, affect the aeration effect, and greatly reduce the oxygenation capacity and stirring performance. Environmental protection recommends cleaning the aerator regularly, and the cleaning cycle is determined according to the operating conditions.
Detail
After long-term operation of Wholesale Aerating machine, it is easy to deposit calcium and iron scale in the water on the aeration membrane, block the holes of the aeration plate, affect the aeration effect, and greatly reduce the oxygenation capacity and stirring performance. Environmental protection recommends cleaning the aerator regularly, and the cleaning cycle is determined according to the operating conditions.
Different aeration forms of Wholesale Aerating machine factory
Different aeration forms of Wholesale Aerating machine factory
Wholesale Aerating machine is an important link in the operation of biochemical system. Its main function is to add air to the sewage to ensure the dissolved oxygen required for microbial metabolism, and to stir the water body to prevent the suspended solids from sinking.
Detail
Wholesale Aerating machine is an important link in the operation of biochemical system. Its main function is to add air to the sewage to ensure the dissolved oxygen required for microbial metabolism, and to stir the water body to prevent the suspended solids from sinking.
What are the characteristics of Aerating machine products
What are the characteristics of Aerating machine products
Aerating machine is also called air pump, air pump and air pump. It works by the operation of the motor. Aerating machine is the motor running. When the air is pumped, the valve of the connector is flushed by the atmospheric pressure, and the gas enters the air cylinder. When the tire is inflated, the valve is closed by the air pressure in the air cylinder, and the gas enters the tire.
Detail
Aerating machine is also called air pump, air pump and air pump. It works by the operation of the motor. Aerating machine is the motor running. When the air is pumped, the valve of the connector is flushed by the atmospheric pressure, and the gas enters the air cylinder. When the tire is inflated, the valve is closed by the air pressure in the air cylinder, and the gas enters the tire.
Best Marshmallow aeration machine tells the knowledge of aerators
Best Marshmallow aeration machine tells the knowledge of aerators
A self-priming screw aerator includes a driving main body and an aeration mechanism, the driving main body is installed on the angle adjustment mechanism, and the driving main body includes a motor and a motor end frame built in a casing.
Detail
A self-priming screw aerator includes a driving main body and an aeration mechanism, the driving main body is installed on the angle adjustment mechanism, and the driving main body includes a motor and a motor end frame built in a casing.

Foshan Aeros Industrial EquipmentCo.,Ltd(Sales Office)



Address: No.6,mingXi Road,Ming Chen Town,GaomingDistrict,Foshan,Guangdong Provice,PRC.
Tel: +86-757-88933066 / 88933068 +86-18123521651
Fax: +86-757-88933063
E-mail: aeroschina02@126.com

Factory Foshan Aeros Industrial EquipmentCo.,Ltd (Factory)
 

Address: No.6 Mingxi Road,Mingcheng Town,
Gaoming District, Foshan City, Guangdong Province, China
Tel: +86-757-88933066
Fax: +86-757-88933063

HK Offce:Aeros(international)Co.,Ltd



Address: Rm 5,16/F.,Kwong Kin Trade Centre,
5 Kin Fat Street,Tuen Mum,N,T.,Hong Kong
Tel: +852 2499 1823
Fax: +852 2499 1822
E-mail: aeroschina@gmail.com aeroschina05@126.com

Message to us

留言应用名称:
底部留言
描述:
验证码
QRcode

Copyright ©  Guangdong,China, Foshan Aeros Industrial Equipment Co., Ltd. All Rights Reserved.
粤ICP备18025868号 www.300.cn