After long-term operation of Wholesale Aerating machine, it is easy to deposit calcium and iron scale in the water on the aeration membrane, block the holes of the aeration plate, affect the aeration effect, and greatly reduce the oxygenation capacity and stirring performance. Environmental protection recommends cleaning the aerator regularly, and the cleaning cycle is determined according to the operating conditions.

　　Wholesale Aerating machine can be cleaned by the following methods:

　　Drain the aeration tank and clean with water, brush or high pressure; drain the aeration tank, take out the aerators, and clean them one by one; take the aeration group out of the aeration tank and clean the aerators one by one; use an automatic cleaning device to clean (formic acid );

　　Studies have shown that formic acid pickling is an effective method for cleaning aeration panels. The whole pickling process does not affect the normal operation of sewage treatment, and is of great significance to the maintenance and service life of the Wholesale Aerating machine. Compared with other measures, this method is more convenient and economical.

　　Wholesale Aerating machine It is worth reminding that the pickling operation of the aerator should be carried out according to certain procedures. Valves, nozzles, and quick-connectors should be inspected before using the washer to clean the system. If the joint is found to be leaking, the seal and other necessary parts should be replaced immediately; the acidity of the material should be considered when repairing valves, quick connectors and nozzles. When connecting, check that the connectors are clean and in good working order.