Never Can Be Copied
The process begins with, all ingredients will be pre-weighed and set ready for handling at the pre-mixer. After starting the pre-mixer the ingredients will be manually fed into the pre-mixer at a rate and sequence as required for the specific recipe. Once the batch is pre-mixed then feed the whole batch into the buffer tank which is ready for production.
The air,synchronises with the main pump, is injected into the mixing head at a rate as set from the touch screen panel. In the mixing head the pins of both the rotor and stator see to it that the air is homogeneously mixed with the ingredient down to the required density and structure.
If necessary, we inject the gel or other chemicals through the front, middle, rear or cover entrance of the mixing head into the foam. It can be set automatically dosing the required amount from the touch screen panel.
From the mixing head the aerated foam is discharged towards the manifold depositing system, mould, trays or steel band oven or discharge to hopper type depositor for further processing.