tel
Wechat:
Aerososcar
tel
Tel:
+86-18123521651
中文版

MENU

/
/
/
What are the operating procedures of Cake mixing machine?

What are the operating procedures of Cake mixing machine?

  • Sort:Industry news
  • Auth:
  • Source:
  • Release time:2021-07-30 11:32
  • Pvs:

【概要描述】The operator needs to read the manual of the mixer and be familiar with the performance and usage of the mixer.

What are the operating procedures of Cake mixing machine?

【概要描述】The operator needs to read the manual of the mixer and be familiar with the performance and usage of the mixer.

  • Sort:Industry news
  • Auth:
  • Source:
  • Release time:2021-07-30 11:32
  • Pvs:
Detail

Do you know what the operating procedures of Cake mixing machine are? Follow the editor to have a simple understanding!
1. The operator needs to read the manual of the mixer and be familiar with the performance and method of use of the mixer.
2. It is necessary to check whether the power supply and grounding wire of the food mixer are firmly connected before starting the machine.
3. Before starting the machine, check whether there are hard objects, iron objects and sundries in the mixer barrel, and whether it is clean and hygienic.
4. When working, do not put your hands into the mixer barrel, or scrape food with hard objects to prevent pinching.


5. When the mixer is running, the food should not be taken out and the power supply should be cut off. The food can only be taken out after stopping the operation.
6. When the mixer is running, the operator should observe its operation. If a fault is found, the power supply should be cut off and the operation should be stopped before maintenance.
7. After using the mixer, the power supply should be cut off, scrubbed clean, covered with a lid, and kept clean and hygienic.
In summary, the editor tells: a brief introduction to knowledge about the operating procedures of Cake mixing machine.

关键词:

More News

The reason why the yogurt in the Yogurt production line is not fermented
The reason why the yogurt in the Yogurt production line is not fermented
Sometimes in the Yogurt production line, yogurt does not ferment.
Detail
Sometimes in the Yogurt production line, yogurt does not ferment.
Meringue production line needs to install the equipment
Meringue production line needs to install the equipment
The Meringue production line resistance measurement method is often used to check whether the line is connected or not, whether there is a short circuit between two points
Detail
The Meringue production line resistance measurement method is often used to check whether the line is connected or not, whether there is a short circuit between two points
quality Meringue production line products There are several procedures in the production line
quality Meringue production line products There are several procedures in the production line
The quality Meringue production line products production line also contains a variety of fat-free acids, such as erucic acid, tungoleic acid, ricinoleic acid, etc. Due to the different characteristics of these three oils, lard is used in the production of Chinese pastries. The crisping effect is good, followed by butter.
Detail
The quality Meringue production line products production line also contains a variety of fat-free acids, such as erucic acid, tungoleic acid, ricinoleic acid, etc. Due to the different characteristics of these three oils, lard is used in the production of Chinese pastries. The crisping effect is good, followed by butter.
how china Meringue production line products are processed
how china Meringue production line products are processed
China Meringue production line products are also often used as a simple method to check components. In the test world, when the voltage measurement method can not be used to distinguish the cause of the defect is the short circuit of the resistor or the short circuit of the emitter base of the transistor, it can be Solder one end of the resistor from the circuit board, and then measure the resistance of the resistor.
Detail
China Meringue production line products are also often used as a simple method to check components. In the test world, when the voltage measurement method can not be used to distinguish the cause of the defect is the short circuit of the resistor or the short circuit of the emitter base of the transistor, it can be Solder one end of the resistor from the circuit board, and then measure the resistance of the resistor.

Foshan Aeros Industrial EquipmentCo.,Ltd(Sales Office)



Address: No.6,mingXi Road,Ming Chen Town,GaomingDistrict,Foshan,Guangdong Provice,PRC.
Tel: +86-757-88933066 / 88933068 +86-18123521651
Fax: +86-757-88933063
E-mail: aeroschina02@126.com

Factory Foshan Aeros Industrial EquipmentCo.,Ltd (Factory)
 

Address: No.6 Mingxi Road,Mingcheng Town,
Gaoming District, Foshan City, Guangdong Province, China
Tel: +86-757-88933066
Fax: +86-757-88933063

HK Offce:Aeros(international)Co.,Ltd



Address: Rm 5,16/F.,Kwong Kin Trade Centre,
5 Kin Fat Street,Tuen Mum,N,T.,Hong Kong
Tel: +852 2499 1823
Fax: +852 2499 1822
E-mail: aeroschina@gmail.com aeroschina05@126.com

Message to us

留言应用名称:
底部留言
描述:
验证码
QRcode

Copyright ©  Guangdong,China, Foshan Aeros Industrial Equipment Co., Ltd. All Rights Reserved.
粤ICP备18025868号 www.300.cn