tel
Wechat:
Aerososcar
tel
Tel:
+86-18123521651
中文版

MENU

/
/
/
Do you know what is the inspection method for wholesale mixing machine before starting?

Do you know what is the inspection method for wholesale mixing machine before starting?

  • Sort:mixing machine
  • Auth:
  • Source:
  • Release time:2021-05-26 09:54
  • Pvs:

【概要描述】It is necessary to check whether the connecting bolts of the wholesale mixing machine to the motor are loose. If there is looseness, it should be firmed immediately, and it is not allowed to start when the bolts are loose.

Do you know what is the inspection method for wholesale mixing machine before starting?

【概要描述】It is necessary to check whether the connecting bolts of the wholesale mixing machine to the motor are loose. If there is looseness, it should be firmed immediately, and it is not allowed to start when the bolts are loose.

  • Sort:mixing machine
  • Auth:
  • Source:
  • Release time:2021-05-26 09:54
  • Pvs:
Detail

Before starting the wholesale mixing machine, in order to reduce the occurrence of accidents, a check must be carried out before starting. Do you know how to check it? Let’s take a look at it with the editor below!
1. It is necessary to check whether the connecting bolts of the wholesale mixing machine connected to the motor are loose. If there is any looseness, it should be firmed immediately, and it is not allowed to start with loose bolts.
2. Then check whether the gearbox is equipped with oil, whether the amount of oil is sufficient, whether the oil filling port is closed, and whether the breathing valve of the reducer body is intact.
3. Reconfirm that the horizontal error of the stirring shaft installation kettle is within the specified requirements. Excessive horizontal error will affect the swing of the stirring shaft.
4. The connection between the mixing transmission device and the installation surface of the mixing container needs to be firm and reliable. After the mixing transmission device and the wholesale mixing machine are installed, the radial runout of the shaft seal should be ensured, and there is no abnormal sound and jamming of the cranking after installation. Phenomenon occurs.
5. Check whether the solid bolts between the reducer and the mixing unit are firm.
In summary, the editor tells: You can learn more about the inspection knowledge of the wholesale mixing machine before starting.

关键词:

More News

The reason why the yogurt in the Yogurt production line is not fermented
The reason why the yogurt in the Yogurt production line is not fermented
Sometimes in the Yogurt production line, yogurt does not ferment.
Detail
Sometimes in the Yogurt production line, yogurt does not ferment.
Meringue production line needs to install the equipment
Meringue production line needs to install the equipment
The Meringue production line resistance measurement method is often used to check whether the line is connected or not, whether there is a short circuit between two points
Detail
The Meringue production line resistance measurement method is often used to check whether the line is connected or not, whether there is a short circuit between two points
quality Meringue production line products There are several procedures in the production line
quality Meringue production line products There are several procedures in the production line
The quality Meringue production line products production line also contains a variety of fat-free acids, such as erucic acid, tungoleic acid, ricinoleic acid, etc. Due to the different characteristics of these three oils, lard is used in the production of Chinese pastries. The crisping effect is good, followed by butter.
Detail
The quality Meringue production line products production line also contains a variety of fat-free acids, such as erucic acid, tungoleic acid, ricinoleic acid, etc. Due to the different characteristics of these three oils, lard is used in the production of Chinese pastries. The crisping effect is good, followed by butter.
how china Meringue production line products are processed
how china Meringue production line products are processed
China Meringue production line products are also often used as a simple method to check components. In the test world, when the voltage measurement method can not be used to distinguish the cause of the defect is the short circuit of the resistor or the short circuit of the emitter base of the transistor, it can be Solder one end of the resistor from the circuit board, and then measure the resistance of the resistor.
Detail
China Meringue production line products are also often used as a simple method to check components. In the test world, when the voltage measurement method can not be used to distinguish the cause of the defect is the short circuit of the resistor or the short circuit of the emitter base of the transistor, it can be Solder one end of the resistor from the circuit board, and then measure the resistance of the resistor.

Foshan Aeros Industrial EquipmentCo.,Ltd(Sales Office)



Address: No.6,mingXi Road,Ming Chen Town,GaomingDistrict,Foshan,Guangdong Provice,PRC.
Tel: +86-757-88933066 / 88933068 +86-18123521651
Fax: +86-757-88933063
E-mail: aeroschina02@126.com

Factory Foshan Aeros Industrial EquipmentCo.,Ltd (Factory)
 

Address: No.6 Mingxi Road,Mingcheng Town,
Gaoming District, Foshan City, Guangdong Province, China
Tel: +86-757-88933066
Fax: +86-757-88933063

HK Offce:Aeros(international)Co.,Ltd



Address: Rm 5,16/F.,Kwong Kin Trade Centre,
5 Kin Fat Street,Tuen Mum,N,T.,Hong Kong
Tel: +852 2499 1823
Fax: +852 2499 1822
E-mail: aeroschina@gmail.com aeroschina05@126.com

Message to us

留言应用名称:
底部留言
描述:
验证码
QRcode

Copyright ©  Guangdong,China, Foshan Aeros Industrial Equipment Co., Ltd. All Rights Reserved.
粤ICP备18025868号 www.300.cn